Got lazy but have posted once about my Extruder being the reason why Octoprint or Firmware is not starting the Print.
I compiled my Marlin Firmware by adding
#define DEFAULT_Kp 16.44
#define DEFAULT_Ki 1.58
#define DEFAULT_Kd 42.75
and it starts, but it does weirdly extrude. When I hit “Extrude 5mm” Manually while nothing is running then it seems like a nice constant flow, but when Printing it somehow stocks, retracts or smth when trying to print. At first I thought its TPU and a new abstract material I have never touched but this currently is the good old Black PLA from Creality that I always used.
I use Cura and just used the default settings for PLA like always.
If you extrude 5mm does your printer actually move 5mm through the nozzle? Also you said you compiled marlin and you changes these three variables. Did you recompile marlin just to change these because that is usually not necessary. You can use pid Autotuning andnsave the values in the eeprom.
How do I save it into the eeprom? I could download the official Ender 3 Pro Marlin Firmware and do it I assume
If the only thing you wanted to do is change the PID values then you should go back to your previous firmware. For PID tuning I can recommend this site: https://teachingtechyt.github.io/calibration.html#pid
I heard that compiling your own Marlin Firmware would be better because you get the new features and etc. The Marin firmware gives me my Ender 3 Pro as a config I can compile which I used. So I assume I get nothing in return for using the Official one or my own compiled one.
I learned now that I could save things to eeprom with “M500” command and found on Reddit a post that gave me “M92 E420.69” for my Creality Pro Extruder. A funny number indeed
You’ll need to determine that extruder value yourself by marking out 70mm of filament from the top of the nozzle and then slowly extruding out 50mm of filament. You should have 20mm remaining after (measuring all this with digital calipers). If you have more than 20mm, you’re underextruding and less means over extrusion. To determine your new extrusion value, multiply your current extrusion value by (actual extruded amount/requested extruded amount). For example if you have 30mm leftover, it’d be 420.69 * (40mm/50mm) = 336.552
