• stooovie@lemmy.worldOPEnglish
    6·
    1 year ago

    My kitted out Ender 3 with pink ABS accessories I have added over the years. I like the black/pink color combo.

    • stooovie@lemmy.worldOPEnglish
      7·
      1 year ago

      thanks! oh boy, I don’t have the time for finding specific info and models, but

      • PEI sheet
      • metal BMG extruder clone from Aliexpress
      • hotend cooling fan is a 4020 for lower noise
      • shroud is an enlarged stock-like one to accomodate the bigger fan
      • PSU fan is a large 8020 with buck converter to lower RPM, with printed case and grille
      • drawer, handlebar, base fan cover, filament guide, tool holder and toolbox all from Thingiverse
      • my own holder for the Xiaomi phone acting as a screen for Klipper (my first model :)
      • Rpi3 with Klipper in the ugly box on the left (printed wrong orientation, it’s bottom up)
      • Capricorn PTFE tube
      • printed springy feet for lower vibrations
      • BLTouch clone by Fysetc
      • yellow springs
      • Creality 4.2.7 silent board as I have somehow managed to fry the default one, plus it’s gloriously silent

      What’s absolutely essential is the dual-gear extruder and the PEI bed. All the other stuff are nice-to-haves.

        • stooovie@lemmy.worldOPEnglish
          8·
          1 year ago

          I have, but I’ve reached the point where I can just send stuff to it and it materalizes, without lots of tweaking and tuning, and I intend to keep it that way for a while :) as you probably know, upgrading these printers usually means fucking everything up and gradually rebuilding

        • c10l@lemmy.worldEnglish
          1·
          1 year ago

          Or a remote direct drive, like a Zesty Nimble or a Flex3Drive.

          I used to have a Nimble on my old CR-10. It’s got a few quirks but the toolhead becomes very lightweight so it can move faster with less strain on the belts!