NY bill would require a criminal history background check for the purchase of a 3D printer::Requires a criminal history background check for the purchase of a three-dimensional printer capable of creating firearms; prohibits sale to a person who would be disqualified on the basis of criminal history from being granted a license to possess a firearm.

  • nomecks@lemmy.world
    link
    fedilink
    English
    arrow-up
    7
    ·
    1 year ago

    You can make a completely 3D printed gun that will survive at least one shot. I’m sure if you’re using resin or carbon fiber reinforced plastic so you could probably get more than one shot off.

    • Piecemakers@lemmy.world
      link
      fedilink
      English
      arrow-up
      5
      ·
      1 year ago

      Resin is generally more brittle than filament, FYI, and the real question with most 3D-printed firearms is whether the shooter survives “at least one shot”.

      • FireTower@lemmy.world
        link
        fedilink
        English
        arrow-up
        5
        ·
        1 year ago

        Most 3d printed guns are either redesigns of existing guns replacing non pressure bearing parts with printed parts (look up FMDA17 a 3D printed Glock 17 equivalent) or mostly printed with pressure bearing parts being barstock or pipes (see FGC-9).

        • Piecemakers@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          1 year ago

          I’m not really sure where you’re getting “Most 3D-printed guns”, but here’s one of the top communities of such. You’ll see quite clearly that MSLA is not the preferred method for production, parts or otherwise.

          • FireTower@lemmy.world
            link
            fedilink
            English
            arrow-up
            2
            ·
            1 year ago

            I wasn’t claiming MSLA was preferred I was commenting in reference to the latter half of the comment. Most 3DP firearms last much more than a single round because they incorporate metal components where important.

            I’m familiar with Defcad, but would recommend The Gatalog over it.

            • Piecemakers@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              1 year ago

              Oh, hey, thanks! I’m new to the concept and my interest is design adjacent: modded Nerf/airsoft arms, so I’m largely unaware of the intricacies of actual firearms printing — though, I’ll give Gatalog a look, fo sho 🤙🏼

              • FireTower@lemmy.world
                link
                fedilink
                English
                arrow-up
                2
                ·
                1 year ago

                In that case you might want to check out Booligan Shooting Sports on YouTube (he took a similar trajectory as you), Fuddbusters, and Ivanprintsguns also have some 3D2A content.

    • kent_eh@lemmy.ca
      link
      fedilink
      English
      arrow-up
      2
      arrow-down
      1
      ·
      1 year ago

      That may usually survive that one shot.

      Or it may fail and cause damage to the person foolish enough to be weilding it.