So, I made my bootable EndevourOS image. I installed it on my secondary SSD, while I have Win11 on my primary SSD (need it for my job).

When I installed it I booted it up and everything was ok. A bit confusing, but ok.

Wanted to get into Windows again because I needed to work on something for a design (Adobe programs), next thing I know: my computer isn’t recognizing my Windows drive…

It’s there. I can see it on the “disks” app on EndevourOS, I can mount the disk and even see my files in there. But it just won’t boot.

Read the documentation and it mentions an “os-prober”, that I needed to change GRUB_DISABLE_OS_PROBER=false in the etc/default/drub file… I don’t have that file anywhere in my system…

I installed os-prober, nothing. I searched any other folder with a similar name and checked files… The only file with a mention of os-prober is grub.d that says “if GRUB_DISABLE_OS_PROBER=xtrue then random warning”, but that is a set of instructions (i think), not the actual file.

I don’t think I should have tried EOS/Arch when I’ve been learning Linux for only 2 days, can anybody help me with this? Thank you for any answers in advance.

  • Yuki@kutsuya.dev
    4·
    1 year ago

    It sounds like your EFI partition got fucked somehow. You could boot a live usb with windows tool like Hirens or Sergei and fix it in there. There are tools in Sergei to fix these issues, I sometimes do this at my job.

    • redimk@lemmy.dbzer0.comOP
      1·
      1 year ago

      This is what I’m thinking happened. I already said this in another comment but will expand here because this comments refers specifically to the EFI partition. Here’s the weird thing, 3 days ago, I had 2 SSDs:

      • 1 with 3 partitions of Windows, one EFI part., one recovery part, and the regular C: local where my files were.
      • On my secondary SSD, I had Fedora installed. If I’m correct, I had a /boot, and /home(?) don’t remember if anything else.

      I decided to do a clean install of Win11. When I did, I had both SSDs connected to my laptop, and when I finished the installation, this was how it was divided:

      • 1st SSD: one, full 2TB C: Local disk, with no partitions.
      • 2nd SSD: One EFI partition, one recovery partition, and one “empty” partition.

      It was highly confusing, because I thought I had Fedora there, my immediate thought was that Win11 just straight up ravaged both my SSDs and decided “fuck it, let’s install wherever the fuck I want” and it did. HOWEVER I could still get into Fedora and use it normally. Still had all the apps and programs I installed, everything was correct. So I assumed the drive still belonged to Fedora.

      When I installed EOS, I chose “Erase Disk” on the secondary SSD (the one with Fedora, the one that had this “EFI partition” that didn’t have before. I think when I erased that SSD, I erased the Windows EFI partition and couldn’t boot as a result. And that’s why the BIOS was not recognizing the OS, but at the same time I could just mount the SSD in EOS and just look t my files normally. So I think that’s what happened, but honestly I’m not even sure of how it happened.

      • dis_honestfamiliar@lemmy.world
        3·
        1 year ago

        Yeah it sounds like you messed up your boot partition. I’m not sure with EFI partitions, but when I used to mess up my legacy boots, I would recover using the windows recovery tools. Some command that would recover them. Again, I’m not sure abilout EFI partition, but maybe this is all you needed.

        Anyway, good luck on your next try. I for one go with the safe route of removing drive(s) until I have the drives I need the install process to know about, you know when first installing an OS. I just don’t have the time for reinstalling things if something does go wrong.