• endlessbeard@lemmy.ml
    link
    fedilink
    English
    arrow-up
    26
    arrow-down
    5
    ·
    8 months ago

    Assuming efficiency of ~4 miles per kWh (on the high end of current EV efficiency), that’s a 200kWh battery. charging that in 10 minutes would require 1.2MW’s of power, enough to power about 50-100 homes simultaneously. Now imagine a handful of vehicles charging simultaneously, consuming as much power as a small city.

    • hitmyspot@aussie.zone
      link
      fedilink
      English
      arrow-up
      7
      arrow-down
      1
      ·
      8 months ago

      Spread it over enough people and it’s the same energy. For one person it’s a much shorter charge. Over a population with random charging times it’s the same consumption off the grid. The problem then becomes a distribution issue, not a production issue.

      Likely these kind of chargers will be expensive and at supercharge stations. Homes will use lower over longer.periods as it’s rare you want to pop home for 10 minutes needing a full charge.

      This is a big step forward, no matter how you look at it.

      It might be also useful for excess storage when we have wind and solar energy that the grid doesnt need. Being able to do so rapidly will mean a smaller array of batteries required for grod storage.

    • zurohki@aussie.zone
      link
      fedilink
      English
      arrow-up
      5
      ·
      8 months ago

      I’m not sure people are going to be interested in paying for megawatt-capable chargers, anyway. There’s a couple of sites near me that have old 50 kW chargers and new 250 kW chargers, and have higher prices on the 250s. I expect that sort of thing to continue - providers are going to want to cover their costs and higher powered chargers are more expensive to buy and operate.

    • SchizoDenji@lemm.ee
      link
      fedilink
      English
      arrow-up
      5
      ·
      8 months ago

      Assuming efficiency of ~4 miles per kWh (on the high end of current EV efficiency)

      Why should we assume this?

    • Acters@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      8 months ago

      I’m getting close to 8m/kwh on the high-end. Realistically, I’m ranging between 3.6 to 5 m/kwh. But when I drove for Uber, I did 200 miles using only 34.1 kwh, I drove slow, and it was mostly city driving. So I could only need 137 kwh for 800 miles. Still prohibitively unrealistic to charge in 10 minutes. It’s about 1.4 MWatts to charge from empty for 10 minutes.

      the charge power needed for the 200KWH is not 1.2 MWatts for 10 minutes, it’s 2MWatts. Mostly because you can only charge fast at lower percentage.

    • Echo Dot@feddit.uk
      link
      fedilink
      English
      arrow-up
      1
      ·
      8 months ago

      That would be impractical even for fleet vehicles.

      Unless they’re also going to announce the development of nuclear fusion in order to provide the necessary cheap energy, then I don’t think this is going anywhere.

      • Aqarius@lemmy.world
        link
        fedilink
        English
        arrow-up
        4
        ·
        edit-2
        8 months ago

        If the discharge rate can be equally speedy, it just means any “gas pump” will include the same battery tech, load itself slowly, then unload into the car quickly. Neat way to solve the “renewables are intermittent” problem.

        • weedazz@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          8 months ago

          That’s a cool idea! But then what happens when I get to the “pump” right after someone else has used it

          • Aqarius@lemmy.world
            link
            fedilink
            English
            arrow-up
            3
            ·
            8 months ago

            Same thing as when you’re on a regular pump and the tank is empty. Pump battery size depending on demand.

            Either that or trickle charge.