As a blacksmith who has made this kind of blade before, it’s incredibly boring.
Not much forging for this particular piece.
If I were to make another, I’d just buy a bulk piece of carbon steel, say 1075 given the large bulk to it, cut the wedge in, and use an industrial grinder to put most of the edge in, then harden it.
I couldn’t really handle anything more than like a 3’ .125"x.125", i melted the heat safe gloves I had (which, according to the instructor, meant they worked, I got my hand away before I lost it) and anything sharp was just hours at a grinding wheel.
And making a plate or anything thin? Fuck that. Welding? Fuck that too. Get your piece so hot it is just below melting point, sprinkle borax on it, and keep it at temperature while you smash the shit out of it and sparks are flying everywhere and then you have an axe head
I use a leather welding glove for whatever hand is getting closest to the forge, no glove for the hammer hand since it dulls the feeling I get while forging.
And honestly, I hate forging. I try to do as little as possible. Unfortunately 5 minutes with a hammer can save a hour of grinding.
As I’ve gotten older I do more stock removal. Start with a piece of steel that’s just barely bigger than your desired knife, then cut/grind off anything that isn’t the knife. It’s still a lot of grinding, but takes less work and less chance to burn your face off.
I had a friend get super into it, and started buying all kinds of shit to do stuff at home, and I warned him he needs to watch more uncut smiting videos (not the montage style popular on some YouTube channels) and try for himself if he can since he didn’t live near me to try with mine.
He ended up hating it because he couldn’t keep up with the constant forearm workouts, and refused to start small to build up strength. Tried to dive right in to making a katana. He ended up selling most of his big tools for a profit though.
With The momentum from the fall combined with the weight of the steel itself, you would be surprised how little weight is needed to cut through, say, a T-bone steak.
I mostly just sell my wares locally by word of mouth. Shipping on large or sharp items can be killer
As a blacksmith who has made this kind of blade before, it’s incredibly boring.
Not much forging for this particular piece.
If I were to make another, I’d just buy a bulk piece of carbon steel, say 1075 given the large bulk to it, cut the wedge in, and use an industrial grinder to put most of the edge in, then harden it.
The rest is carpentry.
Learning to blacksmith was disappointing.
I couldn’t really handle anything more than like a 3’ .125"x.125", i melted the heat safe gloves I had (which, according to the instructor, meant they worked, I got my hand away before I lost it) and anything sharp was just hours at a grinding wheel.
And making a plate or anything thin? Fuck that. Welding? Fuck that too. Get your piece so hot it is just below melting point, sprinkle borax on it, and keep it at temperature while you smash the shit out of it and sparks are flying everywhere and then you have an axe head
It’s not for everyone.
I use a leather welding glove for whatever hand is getting closest to the forge, no glove for the hammer hand since it dulls the feeling I get while forging.
And honestly, I hate forging. I try to do as little as possible. Unfortunately 5 minutes with a hammer can save a hour of grinding.
As I’ve gotten older I do more stock removal. Start with a piece of steel that’s just barely bigger than your desired knife, then cut/grind off anything that isn’t the knife. It’s still a lot of grinding, but takes less work and less chance to burn your face off.
I had a friend get super into it, and started buying all kinds of shit to do stuff at home, and I warned him he needs to watch more uncut smiting videos (not the montage style popular on some YouTube channels) and try for himself if he can since he didn’t live near me to try with mine.
He ended up hating it because he couldn’t keep up with the constant forearm workouts, and refused to start small to build up strength. Tried to dive right in to making a katana. He ended up selling most of his big tools for a profit though.
Get enough weight behind it and it really doesn’t need to be too sharp.
Do you offer a catalog? ;)
With The momentum from the fall combined with the weight of the steel itself, you would be surprised how little weight is needed to cut through, say, a T-bone steak.
I mostly just sell my wares locally by word of mouth. Shipping on large or sharp items can be killer