Newer washing machines vary in time depending on how dirty your clothes are. So the same program may take 50 minutes or 90 minutes. This cannot be solved with a regular timer.
If you have a job with varying hours, you might want to start the washing mashine when you’re heading home. Then you’re clothes are ready to be hung as you arrive and they aren’t laying around for hours.
If you own photovoltaic, you might want to time energy intense home appliances such as washing machines, dish washers etc. to a period of overproduction.
Not saying, these issues are super important but there definitely are use cases for smart devices. However, I’d always recommend using a local / self-hosted rather than a cloud-based solution.
I just want a washer that can work with the water softener to determine if there’s enough soft water for a load or if it should request the softener regenerate first. So the smart home I’d like to have is one where sometimes it will advise against doing laundry until I’ve acquired more salt. All without any data leaving my home network, and if I’m accessing it remotely, it’s by accessing my home server without any other computer needing to be involved.
If smart options were actually smart you could do that.
With the right devices I’m certain this can be done with HomeAssistant, but everyone who makes these appliances wants to wall you into their cloud ecosystem and harvest your activity data.
Yeah, technologically, it’s not only possible but even simple. It would come down to the washer knowing how much water it needs for a cycle and the softener knowing how much soft water it can provide, a means of getting that information from each of them, and then an if statement with a > check and a way to tell the softener to cycle and washer to start.
I wonder when an appliance hacking community is going to rise up. I know that all that information is available to my water softener controller because I use it to manually check that before running the laundry or dishwasher. So a custom controller could add network capabilities. Then just give it an API so it can be queried and directed and the actual smart software can exist entirely on the server.
Kinda makes me want to buy an extra softener to hack and see if it’s as easy as I suspect it might be, but don’t want to try it with my only one because I also suspect I’m wrong lol.
Newer washing machines vary in time depending on how dirty your clothes are. So the same program may take 50 minutes or 90 minutes. This cannot be solved with a regular timer.
If you have a job with varying hours, you might want to start the washing mashine when you’re heading home. Then you’re clothes are ready to be hung as you arrive and they aren’t laying around for hours.
If you own photovoltaic, you might want to time energy intense home appliances such as washing machines, dish washers etc. to a period of overproduction.
Not saying, these issues are super important but there definitely are use cases for smart devices. However, I’d always recommend using a local / self-hosted rather than a cloud-based solution.
y’all are min-maxing life a bit hard there.
I just want a washer that can work with the water softener to determine if there’s enough soft water for a load or if it should request the softener regenerate first. So the smart home I’d like to have is one where sometimes it will advise against doing laundry until I’ve acquired more salt. All without any data leaving my home network, and if I’m accessing it remotely, it’s by accessing my home server without any other computer needing to be involved.
If smart options were actually smart you could do that.
With the right devices I’m certain this can be done with HomeAssistant, but everyone who makes these appliances wants to wall you into their cloud ecosystem and harvest your activity data.
Yeah, technologically, it’s not only possible but even simple. It would come down to the washer knowing how much water it needs for a cycle and the softener knowing how much soft water it can provide, a means of getting that information from each of them, and then an if statement with a > check and a way to tell the softener to cycle and washer to start.
I wonder when an appliance hacking community is going to rise up. I know that all that information is available to my water softener controller because I use it to manually check that before running the laundry or dishwasher. So a custom controller could add network capabilities. Then just give it an API so it can be queried and directed and the actual smart software can exist entirely on the server.
Kinda makes me want to buy an extra softener to hack and see if it’s as easy as I suspect it might be, but don’t want to try it with my only one because I also suspect I’m wrong lol.
I thought they go off of weight. How could they tell how dirty they are?